Wallcovering Specifications
-
UNIT OF MEASURE
-
Patterns are available 54" wide, sold by the linear yard.
- linear yard is 54" x 36" = 13.5 SF
Most are also available 27" wide and sold as narrow yards.
- narrow yard is 27" x 36" = 6.75 SF
-
PACKAGING
-
- 54" wide goods are packaged in 50 yard bolts.
- 27" wide goods are packaged in 100 yard bolts.
- A cut charge of $1.50/LY applies to orders other than 50 LY increments. There is no cut charge on borders.
-
TECHNICAL DATA
-
Wallcoverings meet all federal specifications for CCC-W408-A & B, Type I and Type II. Flame spread rating is Class A.
Type I Results Type II Results Ounce Weight 12/13oz. 15/16oz. 18/19oz. 20/21oz. 24oz. Flame Spread 5 10 5 10 10 Smoke Developed 0 0 0 0 20
All patterns are tested per ASTM-E-84 by an independent research laboratory. Test results are available upon request. These numeric flame spread tests and other tests referenced herein are not intended to reflect hazards presented by this or any other material under actual fire conditions. -
INSTALLATION INSTRUCTIONS:
-
Manufacturer's printed installation instructions are enclosed in each bolt of vinyl wallcovering shipped from U.S. Vinyl Manufacturing Corporation. Failure to follow the manufacturer's installation instructions voids all manufacturer's warranties and liability. You can also download and print installation instructions by clicking the link below.
-
CLEANING INSTRUCTIONS:
-
Sponge wallcovering with a solution of warm water and mild soap such as Ivory Liquid Dish Detergent. Always sponge from the ceiling to the floor to avoid streaking. Rinse with a clean sponge and warm water, wiping off excess with a clean soft cloth. Do not use abrasive cleaners or cleaners containing chlorine bleach or solvents.
-
SHOWER CURTAIN CLEANING INSTRUCTIONS:
-
Hand or machine wash in warm or cool water with mild soap solution. Do not use bleach or detergent, line dry or tumble dry at low setting.
-
ADHESIVES TECHNICAL DATA SHEETS
-
FLAME CERTIFICATES
-
ASTM Test Reports